| |
Rubber Mixing Mill with Stock Blender
Rubber mixing mill with stock blender is chiefly used for the mastication, mixing, warming up and sheeting of rubber, especially as accessory of internal mixers to make rubber sheets.
The rollers are made of chilled cast iron with vanadium and titanium alloys. The roller face is hard and anti-wear. The internal cavity is processed to make temperature well proportioned on the roll surface.
The machine is equipped with an overload protection device to prevent the major components from being damaged due to overloading.
The machine is also equipped with an emergency device. When an emergency accident happens, just draw the pull rod, and the machine will stop immediately. It is safe and reliable.
The transmission system adopts a hard facing gear reducer, which has a compacted structure with higher transmission effciency, lower noise and longer service life.
The base frame is a complete framework, which is convenient for installation.
NOTE: all the models may be optionally equipped with either copper bushes or rolling bearings.
Model
XKY-550
XKY-660
XKY-710
Item
Roll diameter
mm
550
660
710
Roll working length
mm
1500
2130
2200
Linear speed of front roll
m/min
31.17
32
30.26
Speed ratio of rolls
01:01.1
01:01.1
01:01.1
Compound feeding capacity
kg
140
165
190
Motor power
kW
110
240
280
Dimensions
L
mm
6210
7650
9120
W
mm
2630
3460
3850
H
mm
2900
2720
2930
Gross weight
t
~28
~53
~59
|
