LED Emergency lights 2G11PL
PF-YJ168 Multi-function emergency power unit
(converter) for LED light, LED tube and screw cap energy-saving lights
A. Works with high temperature
Ni-MH and or Ni-Cd rechargeable battery pack
B. Emergency power supply for high
power LED light, LED tube and screw cap energy-saving lights
C. With over charge protection,
over discharge protection and load free protection. Ultra slim structure and
world wide voltage.
D. When there is AC power, the
battery pack is in charging/standby mode. In case of emergency which causes AC
power fail such as earthquake, attack, explosion, the unit will automatically
switches to DC supply from the battery pack for lighting and security. When the
LED indicates normal mode, the battery pack is being charged. When the battery
pack is fully charged, the unit will switch automatically to maintain mode.
Supplied with variable battery pack capacity, the unit can work for 1-5 hours.
E. Working temperature: -25-+70 with the life time of over 2 years. But it must be replaced after 3 years.
F. In case of testing when the unit
is working, please disconnect the battery pack when cut the AC power. And the
battery can only be connected when the unit is fully discharged.
G. Regular test is necessary.
Please cut the AC power supply to enable the unit to work until the battery
pack is fully discharged.
H. Please connect the unit
according to the wiring diagram. DO NOT OPEN THE UNIT.
I. Technical data:
LED lights: 3W-30W
screw cap energy-saving lights: 20W
Working time: 90, 120, 180
minutes or per the customer's requirements
Battery Pack: 7.2V, 9.6V, 10.8V 12V